Aqara FP300 + Home Assistant: Local Setup via Zigbee2MQTT
Switch the Aqara FP300 from Thread to Zigbee, pair it in Zigbee2MQTT, and run it locally in Home Assistant with the full configuration entity set.
~/archive $ ls -la
Archive
Setup Guides
Setup guides
-
-
Aqara Zigbee Devices in Home Assistant Without the Aqara Hub
Use Aqara Zigbee sensors, switches, and plugs in Home Assistant without the Aqara Hub — via Zigbee2MQTT or ZHA and a USB coordinator. Fully local.
-
Aqara FP2 Presence Sensor: Local Setup in Home Assistant
Set up the Aqara FP2 in Home Assistant with no cloud. Covers zones, HomeKit Controller pairing, and blocking Aqara traffic on a VLAN.
-
Aqara Hub E1 + Home Assistant: Local Integration Guide
Connect the Aqara Hub E1 (ZHWG16LM) to Home Assistant without cloud — HomeKit Controller, XiaomiGateway3, and AqaraGateway paths compared.
-
Aqara D1 Triple Wall Switch in Zigbee2MQTT
Set up the Aqara D1 triple switch (QBKG25LM, QBKG26LM) in Zigbee2MQTT and Home Assistant: pairing, entities, decoupled mode, and the state-sync bug.
-
Aqara Single Switch Module T1 in Home Assistant via Zigbee2MQTT
Add any light or fan to Home Assistant locally with the Aqara SSM-U01 or SSM-U02. Zigbee2MQTT pairing, entities, and SKU comparison.
-
Aqara Door & Window Sensor E1 (MCCGQ14LM) in Z2M
Pair the Aqara Door & Window Sensor E1 (MCCGQ14LM) with Zigbee2MQTT and Home Assistant — no Aqara hub. Pairing, entities, EZSP issue, automations.
-
Aqara Wireless Mini Switch T1 (WXKG14LM): HA Setup via Z2M
Pair the Aqara WXKG14LM to Zigbee2MQTT and Home Assistant, enable all four actions with click_mode multi, build local automations.
-
Aqara TVOC Air Quality Monitor: Zigbee2MQTT + HA Setup
Set up the Aqara VOCKQJK11LM (AAQS-S01) in HA via Zigbee2MQTT. Get all entities, fix slow updates, and avoid the historical TVOC scaling bug.
-
Aqara Curtain Driver E1 with Zigbee2MQTT + Home Assistant
Pair the Aqara Curtain Driver E1 (ZNCLBL01LM) with Zigbee2MQTT and Home Assistant — calibration, entities, automations, common fixes.