Aqara FP2 vs FP300 vs FP310 for Home Assistant: Which One?
Aqara's FP2, FP300 and FP310 all run local in Home Assistant, by three different routes. Which one fits a Zigbee2MQTT setup, and what each one costs you.
~/archive $ ls -la
Archive
mmwave
-
-
Aqara FP2 Firmware 1.3.6 Breaks Interference Zones — What to Do Now
Firmware 1.3.6_0003.0099 causes ghost presence inside FP2 interference zones. Here's how to check if you're affected and the workaround that clears it.
-
Aqara FP310 Presence Sensor: Zigbee2MQTT + Home Assistant Local Setup
Set up the Aqara FP310 presence sensor with Zigbee2MQTT and Home Assistant: Thread-to-Zigbee firmware switch, pairing, configuration, and Z2M OTA updates.
-
Aqara FP1E Presence Sensor in Home Assistant (No Hub)
Set up the Aqara FP1E (RTCZCGQ13LM) with Zigbee2MQTT and Home Assistant without an Aqara hub — pairing, entities, AI spatial learning, and automations.
-
Aqara FP2 Presence Sensor: Local Setup in Home Assistant
Set up the Aqara FP2 in Home Assistant with no cloud. Covers zones, HomeKit Controller pairing, and blocking Aqara traffic on a VLAN.