Zigbee2MQTT Battery % Stuck or Wrong: Why It Happens
Zigbee2MQTT battery percentage stuck at 100%, over 100%, or frozen? What battery, voltage and battery_low each measure, and which one to trust.
~/archive $ ls -la
Archive
battery-powered
-
-
Tuya TS0202 PIR Motion Sensor: Zigbee2MQTT Setup & Variants
Pair the Tuya TS0202 PIR sensor in Zigbee2MQTT and check your manufacturer code: some variants expose sensitivity and keep-time settings, some don't.
-
Aqara Wireless Mini Switch Generations Compared: Which to Buy
Aqara sells three mini switch generations at once — WXKG11LM, T1 and E1. What each exposes in Zigbee2MQTT, and which to buy for a local setup.
-
Tuya TS0041 1-Button Switch: Zigbee2MQTT & Home Assistant
Pair the Tuya TS0041 single-button Zigbee switch with Zigbee2MQTT, no Smart Life account needed, and set up single/double/hold press automations locally.
-
Sonoff TRVZB Radiator Valve: Zigbee2MQTT + Home Assistant
Pair the Sonoff TRVZB into Zigbee2MQTT with no Sonoff bridge or eWeLink account, set valve opening degree, and drive it off an external room sensor.
-
Sonoff SNZB-01 Wireless Button: Zigbee2MQTT + Home Assistant
Pair a Sonoff SNZB-01 button with Zigbee2MQTT or ZHA, write press automations that survive the Zigbee2MQTT 2.0 action change, and buy the right coin cell.
-
Aqara Motion Sensor Generations Compared: Which One to Buy
Aqara sells five motion sensor generations with near-identical names. What actually differs in sensitivity, light sensing, OTA and local Zigbee2MQTT use.
-
Aqara & Xiaomi Zigbee Battery Types: The Complete Guide
Which battery does your Aqara or Xiaomi Zigbee sensor take, why Zigbee2MQTT's battery % reading isn't reliable, and when to actually replace it.
-
Aqara Door/Window Sensor Generations Compared: Which to Buy
Aqara's five door/window sensors look alike but expose different data in Zigbee2MQTT. What changed each generation, and which to buy for a local setup.
-
Zigbee2MQTT \”Failed to Configure\” Error: What It Means
Zigbee2MQTT's \"Failed to configure\" error explained: what the ZCL status codes mean, when it's harmless, and how to force a reconfigure without re-pairing.