Aqara TVOC Air Quality Monitor: Zigbee2MQTT + HA Setup
Set up the Aqara VOCKQJK11LM (AAQS-S01) in HA via Zigbee2MQTT. Get all entities, fix slow updates, and avoid the historical TVOC scaling bug.
~/archive $ ls -la
Archive
Zigbee2MQTT
-
-
Aqara Curtain Driver E1 with Zigbee2MQTT + Home Assistant
Pair the Aqara Curtain Driver E1 (ZNCLBL01LM) with Zigbee2MQTT and Home Assistant — calibration, entities, automations, common fixes.
-
Aqara RTCGQ13LM: Local Setup via Zigbee2MQTT
Pair the Aqara RTCGQ13LM to Zigbee2MQTT and Home Assistant with no hub or cloud. Covers pairing, detection interval, sensitivity, and known bugs.
-
Aqara Cube T1 Pro: Zigbee2MQTT Setup in Home Assistant
Pair the Aqara Cube T1 Pro to Zigbee2MQTT without an Aqara hub, set scene vs. action mode, and build automations in Home Assistant. No cloud required.
-
Aqara Wall Switch H1 No Neutral: Zigbee2MQTT + Home Assistant
Set up the Aqara Wall Switch H1 no-neutral (QBKG38LM) with Zigbee2MQTT and Home Assistant — pairing, decoupled mode, automation YAML, LED bulb gotcha.
-
Aqara Vibration Sensor (DJT11LM): Local Setup via Zigbee2MQTT
Pair the Aqara DJT11LM vibration sensor to Zigbee2MQTT — no hub, no cloud. Pairing, sensitivity tuning, and automations for Home Assistant.
-
Aqara Light Sensor T1 (GZCGQ11LM) in Home Assistant via Zigbee2MQTT
Pair the Aqara GZCGQ11LM light sensor to Home Assistant via Zigbee2MQTT — no hub, no cloud. Pairing, entities, detection period, automations.
-
Aqara Wireless Mini Switch (WXKG11LM): Pair with Zigbee2MQTT and Build Home Assistant Automations Without the Aqara Hub
The Aqara Wireless Mini Switch is a CR2032-powered Zigbee button that fits in a shirt pocket and sticks anywhere with double-sided tape. Single press,
-
Aqara FP1E Presence Sensor: Full Local Setup with Zigbee2MQTT and Home Assistant
The Aqara FP1E is a mmWave presence sensor that runs entirely over Zigbee. No Aqara hub required — pair with Zigbee2MQTT for 100% local presence detection in Home Assistant.
-
Aqara T1 Temperature & Humidity Sensor (WSDCGQ12LM): Home Assistant Zigbee Setup Guide
The Aqara T1 (WSDCGQ12LM) is a compact Zigbee sensor that reports temperature, humidity, and atmospheric pressure — entirely locally, no cloud, no Aqara account required after initial pairing. Battery-powered, it runs for up to two years on a single CR2032 cell. This guide covers both Zigbee2MQTT and ZHA integration paths, what entities to expect, how…