Tuya TS0202 PIR Motion Sensor: Zigbee2MQTT Setup & Variants
Pair the Tuya TS0202 PIR sensor in Zigbee2MQTT and check your manufacturer code: some variants expose sensitivity and keep-time settings, some don't.
~/archive $ ls -la
Archive
setup-guide
-
-
Sonoff ZBBridge to Zigbee2MQTT: Tasmota Flash Guide
Flash Tasmota on the original Sonoff ZBBridge (not the Pro) to run it as a Zigbee2MQTT coordinator over TCP: no eWeLink cloud, but one reliability caveat.
-
Tuya TS0041 1-Button Switch: Zigbee2MQTT & Home Assistant
Pair the Tuya TS0041 single-button Zigbee switch with Zigbee2MQTT, no Smart Life account needed, and set up single/double/hold press automations locally.
-
Writing a Custom ZHA Quirk for an Unsupported Zigbee Device
Your Zigbee device pairs with ZHA but exposes only generic entities. How to enable custom quirks and write one with QuirkBuilder, entirely locally.
-
Tuya TS0043 3-Button Scene Switch: Zigbee2MQTT + Home Assistant Setup
The Tuya TS0043 3-button switch also ships as LoraTap SS600ZB and Lonsonho TS0043. Pairing, entities, and automations in Zigbee2MQTT or ZHA — fully local.
-
Zigbee2MQTT on a UGREEN NAS: Docker vs VM Passthrough
UGREEN NAS boxes list Home Assistant as an official app, but Zigbee USB passthrough is documented only for virtual machines, not the Docker app center.
-
SMLIGHT SLZB-06 Setup: Zigbee2MQTT Over Ethernet & PoE
Set up the SMLIGHT SLZB-06 Ethernet Zigbee coordinator in Zigbee2MQTT: TCP vs mDNS, PoE and USB-C power, offline firmware, and SLZB-06 vs SLZB-07.
-
Smartmi Humidifier 2 in Home Assistant: Local, No Cloud
Set up the Smartmi Humidifier 2 (zhimi.humidifier.ca1/cb1) in Home Assistant with local polling, no Mi Home cloud. Includes the token-retrieval gotcha.
-
Aqara Curtain Motor ZNCLDJ11LM: Zigbee2MQTT + Home Assistant Setup
Set up the original Aqara ZNCLDJ11LM curtain motor locally with Zigbee2MQTT and Home Assistant, including the mandatory calibration workflow.
-
Xiaomi GZCGQ01LM Light Sensor in Home Assistant (Z2M)
Pair the Xiaomi GZCGQ01LM light sensor straight into Zigbee2MQTT, no Mi Home needed. Entity set, calibration options, and two illuminance bugs to know first.