SkyConnect/ZBT-1 Multiprotocol: Zigbee + Thread, One Dongle?
SkyConnect/ZBT-1 promised Zigbee and Thread on one radio. Home Assistant now calls multiprotocol experimental and is retiring it. What to run instead.
~/archive $ ls -la
Archive
firmware
-
-
Zigbee2MQTT OTA Update Failed or Stuck? How to Fix It
A Zigbee2MQTT OTA that errors out or freezes at a percentage is rarely a bricked device. Here's what each failure means and which fix actually applies.
-
Tuya TS011F Power Monitoring Not Working: How to Fix
Power, current and voltage missing on a Tuya TS011F Zigbee plug? Firmware 1.0.5 disabled automatic reporting. Here's the polling fix, fully local.
-
Do Aqara/Xiaomi Devices Stop Working When Discontinued?
Aqara or Xiaomi drops a model. Here's what actually happens to the unit already running on your Zigbee2MQTT or ZHA network, and what really can break it.
-
Should You Update Your Zigbee2MQTT Coordinator Firmware?
Your Zigbee2MQTT coordinator flags outdated firmware. Here's when updating is worth it, how to back up first, and the right tool per adapter.
-
Sonoff ZBDongle-E vs ZBDongle-P for Zigbee2MQTT: Which to Buy
Both dongles run Zigbee2MQTT, but the ZBDongle-E's Ember adapter still isn't stable-tier while the ZBDongle-P works out of the box. Which to buy.
-
SMLIGHT SLZB-06 Setup: Zigbee2MQTT Over Ethernet & PoE
Set up the SMLIGHT SLZB-06 Ethernet Zigbee coordinator in Zigbee2MQTT: TCP vs mDNS, PoE and USB-C power, offline firmware, and SLZB-06 vs SLZB-07.
-
Aqara FP2 Firmware 1.3.6 Breaks Interference Zones — What to Do Now
Firmware 1.3.6_0003.0099 causes ghost presence inside FP2 interference zones. Here's how to check if you're affected and the workaround that clears it.
-
Aqara FP310 Presence Sensor: Zigbee2MQTT + Home Assistant Local Setup
Set up the Aqara FP310 presence sensor with Zigbee2MQTT and Home Assistant: Thread-to-Zigbee firmware switch, pairing, configuration, and Z2M OTA updates.