Sonoff Power Sensors Stuck? eWeLink’s 2026 Cloud Block
Sonoff power readings frozen in Home Assistant while switching still works? eWeLink blocked the sensor updates in 2026. SonoffLAN 3.11.0 fixes it locally.
This category is for post focused on deep diving into certain products
Sonoff power readings frozen in Home Assistant while switching still works? eWeLink blocked the sensor updates in 2026. SonoffLAN 3.11.0 fixes it locally.
Flash Tasmota on the original Sonoff ZBBridge (not the Pro) to run it as a Zigbee2MQTT coordinator over TCP: no eWeLink cloud, but one reliability caveat.
SkyConnect/ZBT-1 promised Zigbee and Thread on one radio. Home Assistant now calls multiprotocol experimental and is retiring it. What to run instead.
Which battery does your Aqara or Xiaomi Zigbee sensor take, why Zigbee2MQTT's battery % reading isn't reliable, and when to actually replace it.
Power, current and voltage missing on a Tuya TS011F Zigbee plug? Firmware 1.0.5 disabled automatic reporting. Here's the polling fix, fully local.
Aqara's FP2, FP300 and FP310 all run local in Home Assistant, by three different routes. Which one fits a Zigbee2MQTT setup, and what each one costs you.

Sonoff's DIY Mode swaps eWeLink cloud control for a local HTTP API, no reflash needed. Which devices support it, and how to bring it into Home Assistant.

Aqara or Xiaomi plug showing 0W or N/A in Zigbee2MQTT or ZHA? Two documented reporting faults, the firmware trap to avoid, and how to tell them apart.

Your Zemismart or Tuya curtain motor is one of three different Zigbee2MQTT device types. Here's how to tell yours apart, pair it, and calibrate it right.

A field guide to Aqara's T1, T2, E1, H1, and P1/P2 codes — which track real generations, which are tier names, and how to check before you buy.