Aqara H1 No-Neutral Triple Switch (QBKG29LM) on Zigbee2MQTT
Pairing, entities, decoupled mode, and Zigbee2MQTT setup for the Aqara H1 no-neutral triple switch (QBKG29LM), and how it differs from the with-neutral version.
~/archive $ ls -la
Archive
Wall Switch
-
-
Aqara Light Switch H2 EU for Home Assistant: Zigbee or Thread
The Aqara H2 EU switch (WS-K07E) ships in Thread mode by default, but Zigbee2MQTT exposes more config. Here's how to pick a protocol and pair it locally.
-
Aqara Rotary Knob H1 Wired (ZNXNKG01LM): Zigbee2MQTT Setup
Pair the Aqara ZNXNKG01LM wired rotary knob with Zigbee2MQTT, control all three relay loads in Home Assistant, and use rotation events in automations.
-
Aqara D1 Single Switch (Neutral, QBKG23LM) on Zigbee2MQTT + HA
Pair the Aqara QBKG23LM neutral-wire switch to Zigbee2MQTT, get power monitoring into HA, and avoid the router-vs-end-device bug that broke early setups.
-
Aqara WS-EUK02 No-Neutral Double Rocker: Zigbee2MQTT Guide
Pair the Aqara WS-EUK02 double-rocker no-neutral switch with Zigbee2MQTT and Home Assistant. Covers decoupled mode, anti-flicker, the operation_mode bug, and signal loss.
-
Aqara H1 EU Switch (WS-EUK03): Zigbee2MQTT + HA Guide
Set up the Aqara H1 EU single-rocker switch (WS-EUK03) with Zigbee2MQTT and Home Assistant — pairing, decoupled mode, power monitoring, and the action-not-firing bug.
-
Aqara H1 EU No-Neutral Switch (WS-EUK01): Zigbee2MQTT Guide
How to pair the Aqara WS-EUK01 with Zigbee2MQTT and Home Assistant, fix LED flicker, set decoupled mode, and work around the known operation_mode bugs.
-
Aqara Display Switch V1 (WS-K02D): Zigbee2MQTT & Home Assistant Setup
Run the Aqara Display Switch V1 (WS-K02D) locally via Zigbee2MQTT — no hub, no cloud. External converter setup and HA entity guide.
-
Aqara D1 Double Switch (QBKG24LM) With Neutral in Home Assistant
Set up the Aqara D1 QBKG24LM with-neutral double wall switch in Home Assistant via Zigbee2MQTT. Covers pairing, power monitoring, decoupled mode, and OTA firmware.
-
Aqara D1 Double Wall Switch (No Neutral) in Home Assistant via Zigbee2MQTT
Set up the Aqara D1 double rocker QBKG22LM in Home Assistant via Zigbee2MQTT — no Aqara hub needed. Covers pairing, decoupled mode, and LED compatibility.