Aqara Door Sensor T1 + Home Assistant: Local Setup Guide
Set up the Aqara Door and Window Sensor T1 (MCCGQ12LM) in Home Assistant without the Aqara cloud. Covers Zigbee2MQTT and ZHA, model variants, battery quirks, and automations.
~/archive $ ls -la
Archive
battery-powered
-
-
Aqara Wireless Mini Switch (WXKG11LM): Pair with Zigbee2MQTT and Build Home Assistant Automations Without the Aqara Hub
The Aqara Wireless Mini Switch is a CR2032-powered Zigbee button that fits in a shirt pocket and sticks anywhere with double-sided tape. Single press,
-
Aqara T1 Temperature & Humidity Sensor (WSDCGQ12LM): Home Assistant Zigbee Setup Guide
The Aqara Temperature and Humidity Sensor T1 reports temperature, relative humidity, and atmospheric pressure over Zigbee. Pair it directly with a Home Assistant coordinator using Zigbee2MQTT or ZHA, and you can keep those readings and your local automations under your own control. This guide covers identifying the model, pairing through either integration, checking the readings,…
-
Aqara Water Leak Sensor in Home Assistant via Zigbee2MQTT (No Hub)
Pair the Aqara SJCGQ11LM or SJCGQ12LM to Home Assistant locally via Zigbee2MQTT — no hub, no cloud. Full setup, automations, and placement guide.
-
Aqara Cube T1 Pro: Home Assistant Automations via Zigbee2MQTT (Full Guide)
Aqara Cube T1 Pro: Home Assistant Automations via Zigbee2MQTT The Aqara Cube T1 Pro gives you physical controls for Home Assistant: shake to toggle a light, rotate to change brightness, or turn a numbered face upwards to select a scene. The useful part is choosing a small set of gestures that people can remember. This…
-
Aqara Door Sensor in Home Assistant via Zigbee2MQTT (No Hub)
Aqara contact sensors can tell Home Assistant when a door, window, drawer, or cupboard opens. With Zigbee2MQTT they pair to your own coordinator, so you can build local lighting and household alerts without an Aqara hub, Mi Home app, or Aqara account. This guide covers the older MCCGQ11LM and the MCCGQ14LM E1, known as 门窗传感器…
-
Aqara P1 Motion Sensor + Home Assistant: Full Local Setup via Zigbee2MQTT
The Aqara P1 (RTCGQ14LM, also sold as MS-S02) lets you adjust motion sensitivity and the interval between reports in Zigbee2MQTT. It runs on two CR2450 batteries and reports movement and illuminance to Home Assistant through your Zigbee coordinator. An Aqara hub or account is unnecessary for this route. There is one setting worth understanding before…
-
Xiaomi Zigbee Devices in Home Assistant via Zigbee2MQTT: 100% Local, No Cloud
Many Xiaomi and Aqara Zigbee sensors work with Home Assistant through Zigbee2MQTT. Pair them with your own coordinator and HA can receive their readings without a vendor hub or account. Check the supported-device entry for the exact model first. The local path is device → Zigbee coordinator → Z2M → MQTT → HA. Your automations…