Aqara Presence Sensors Compared: Which One Do You Have?
Five Aqara presence sensors, three integration paths. Find your model, see which run on Zigbee2MQTT or HomeKit Controller, and what each needs to stay local.
~/archive $ ls -la
Archive
fp2
-
-
Aqara FP2 vs FP300 vs FP310 for Home Assistant: Which One?
Aqara's FP2, FP300 and FP310 all run local in Home Assistant, by three different routes. Which one fits a Zigbee2MQTT setup, and what each one costs you.
-
Aqara FP2 Firmware 1.3.6 Breaks Interference Zones — What to Do Now
Firmware 1.3.6_0003.0099 causes ghost presence inside FP2 interference zones. Here's how to check if you're affected and the workaround that clears it.
-
Aqara FP2 vs FP300 for Home Assistant: Which to Buy?
FP2 and FP300 are very different sensors with very different HA integration paths. The honest comparison for a local-first Home Assistant setup.
-
Aqara FP2 Presence Sensor: Local Setup in Home Assistant
Set up the Aqara FP2 in Home Assistant with no cloud. Covers zones, HomeKit Controller pairing, and blocking Aqara traffic on a VLAN.
-
Aqara Presence Sensor FP2: Local-Only Setup for Home Assistant and HomeKit
Disclosure: This post contains affiliate links. If you buy through them, we earn a small commission at no extra cost to you. The Aqara Presence Sensor FP2 can detect someone sitting still and distinguish different areas of a room. That makes it useful for automations a motion sensor struggles with: keeping a reading light on…