Aqara Ceiling Light T1M (CL-L02D): Zigbee2MQTT & Home Assistant Local Setup
Pair the Aqara Ceiling Light T1M (CL-L02D) with Zigbee2MQTT and Home Assistant, including the Thread-mode switch that trips up most first-time pairings.
~/archive $ ls -la
Archive
Zigbee
-
-
Aqara Shutter Switch H2 EU in Home Assistant: Two Paths to Local Control
Aqara Shutter Switch H2 EU (DS-K02D/E) works with Home Assistant via Zigbee2MQTT or Thread/Matter — both fully local. Here's what each path takes.
-
Aqara Magic Cube T1 Pro (CTP-R01): Zigbee2MQTT + Home Assistant Setup
Pair the Aqara Magic Cube T1 Pro (CTP-R01) to Zigbee2MQTT and Home Assistant: pairing, scene vs action mode, the hourly config window, and working automation YAML.
-
Aqara Dual Relay T2 (LLKZMK12LM): Zigbee2MQTT + HA Guide
Pair the Aqara Dual Relay T2 (LLKZMK12LM) with Zigbee2MQTT and Home Assistant: wet/dry modes, interlock, garage door, and energy monitoring.
-
Aqara Cloud OAuth Flaw (CVE-2026-50090): What It Is and Whether You Are Affected
CVE-2026-50090 is a CVSS 9.3 OAuth redirect bypass in Aqara's cloud. If you run Zigbee2MQTT, ZHA, or local HomeKit, you are not in scope. Here is why.
-
Xiaomi Multimode Gateway Local Control in Home Assistant
Set up the Xiaomi Multimode Gateway (ZNDMWG03LM/ZNDMWG02LM) for true local control in Home Assistant using XiaomiGateway3 — no cloud required.
-
Aqara Dimmer Switch H2 (KD-R01D): Zigbee2MQTT & Home Assistant
Set up the Aqara Dimmer Switch H2 (KD-R01D) with Zigbee2MQTT and Home Assistant. Covers the firmware switch, decoupled mode, smart bulb automations, and known bugs.
-
Aqara WS-EUK04 H1 EU: Zigbee2MQTT + Home Assistant
Set up the Aqara WS-EUK04 with Zigbee2MQTT and Home Assistant. Covers decoupled mode, energy monitoring, and the missing-entities pairing fix.
-
Aqara Scene Panel Switch S1 (ZNCJMB14LM): Zigbee2MQTT Setup
Pair the Aqara Scene Panel Switch S1 (ZNCJMB14LM) to Zigbee2MQTT with no Aqara hub, configure its three relays, and build decoupled scene triggers in HA.
-
Aqara Motion Sensor T1 (RTCGQ12LM): Zigbee2MQTT Setup
Set up the Aqara Motion and Illuminance Sensor T1 (RTCGQ12LM) in Home Assistant via Zigbee2MQTT — no hub, no cloud. Pairing, timeout, lux automations.