
Aqara Hub M100 and Home Assistant: Local Matter Setup
Connect Aqara Hub M100 to Home Assistant via Matter bridge for local control. VLAN setup, entity differences from M2/M3, and what still needs cloud.

Connect Aqara Hub M100 to Home Assistant via Matter bridge for local control. VLAN setup, entity differences from M2/M3, and what still needs cloud.

Aqara HomeKit mode is not the same as local automations. What runs offline, what still needs cloud, and which setup fits your privacy goals.

Switch the Aqara FP300 from Thread to Zigbee, pair it in Zigbee2MQTT, and run it locally in Home Assistant with the full configuration entity set.

FP2 and FP300 are very different sensors with very different HA integration paths. The honest comparison for a local-first Home Assistant setup.

The official ha_xiaomi_home integration has three control modes. Outside China, only one is genuinely local, and it has real gaps. Here's what you get.

Aqara's local vs cloud behavior explained: what survives an outage, what dies, whether LAN mode works, and how Home Assistant removes the cloud.

Use Aqara Zigbee sensors, switches, and plugs in Home Assistant without the Aqara Hub — via Zigbee2MQTT or ZHA and a USB coordinator. Fully local.

Connect the Aqara Hub E1 (ZHWG16LM) to Home Assistant without cloud — HomeKit Controller, XiaomiGateway3, and AqaraGateway paths compared.

Add any light or fan to Home Assistant locally with the Aqara SSM-U01 or SSM-U02. Zigbee2MQTT pairing, entities, and SKU comparison.

Pair the Aqara Door & Window Sensor E1 (MCCGQ14LM) with Zigbee2MQTT and Home Assistant — no Aqara hub. Pairing, entities, EZSP issue, automations.