Aqara D1 Double Switch (QBKG24LM) With Neutral in Home Assistant
Set up the Aqara D1 QBKG24LM with-neutral double wall switch in Home Assistant via Zigbee2MQTT. Covers pairing, power monitoring, decoupled mode, and OTA firmware.
~/archive $ ls -la
Archive
setup-guide
-
-
Aqara D1 Double Wall Switch (No Neutral) in Home Assistant via Zigbee2MQTT
Set up the Aqara D1 double rocker QBKG22LM in Home Assistant via Zigbee2MQTT — no Aqara hub needed. Covers pairing, decoupled mode, and LED compatibility.
-
Aqara Ceiling Light T1M (CL-L02D): Zigbee2MQTT & Home Assistant Local Setup
Pair the Aqara Ceiling Light T1M (CL-L02D) with Zigbee2MQTT and Home Assistant, including the Thread-mode switch that trips up most first-time pairings.
-
Aqara Triple Wall Switch H1 (Neutral) in Zigbee2MQTT & HA
Set up the Aqara QBKG34LM triple wall switch in Zigbee2MQTT and Home Assistant. Covers entities, decoupled mode, power monitoring, and Zigbee mesh routing.
-
Aqara Shutter Switch H2 EU in Home Assistant: Two Paths to Local Control
Aqara Shutter Switch H2 EU (DS-K02D/E) works with Home Assistant via Zigbee2MQTT or Thread/Matter — both fully local. Here's what each path takes.
-
Aqara Magic Cube T1 Pro (CTP-R01): Zigbee2MQTT + Home Assistant Setup
Pair the Aqara Magic Cube T1 Pro (CTP-R01) to Zigbee2MQTT and Home Assistant: pairing, scene vs action mode, the hourly config window, and working automation YAML.