Aqara Triple Wall Switch H1 (Neutral) in Zigbee2MQTT & HA
Set up the Aqara QBKG34LM triple wall switch in Zigbee2MQTT and Home Assistant. Covers entities, decoupled mode, power monitoring, and Zigbee mesh routing.
~/archive $ ls -la
Archive
setup-guide
-
-
Aqara Shutter Switch H2 EU in Home Assistant: Two Paths to Local Control
Aqara Shutter Switch H2 EU (DS-K02D/E) works with Home Assistant via Zigbee2MQTT or Thread/Matter — both fully local. Here's what each path takes.
-
Aqara Magic Cube T1 Pro (CTP-R01): Zigbee2MQTT + Home Assistant Setup
Pair the Aqara Magic Cube T1 Pro (CTP-R01) to Zigbee2MQTT and Home Assistant: pairing, scene vs action mode, the hourly config window, and working automation YAML.
-
Aqara Dual Relay T2 (LLKZMK12LM): Zigbee2MQTT + HA Guide
Pair the Aqara Dual Relay T2 (LLKZMK12LM) with Zigbee2MQTT and Home Assistant: wet/dry modes, interlock, garage door, and energy monitoring.
-
Aqara D1 Single Switch (No Neutral) QBKG21LM: Local Setup Guide
Pair the Aqara QBKG21LM no-neutral switch to Home Assistant via Zigbee2MQTT or ZHA, skip the Aqara Hub, and plan mesh placement correctly.
-
Xiaomi MJWSD05MMC + Home Assistant: Local via BTHome
Flash pvvx firmware on the Xiaomi Mijia Thermometer 3 (MJWSD05MMC) and add it to Home Assistant locally via BTHome — no Mi Home cloud, no ESP32 needed.
-
Aqara Door/Window Sensor P2: Matter/Thread in Home Assistant
How to pair the Aqara P2 door sensor to Home Assistant via Matter over Thread: prerequisites, step-by-step pairing, entity setup, and troubleshooting.
-
Xiaomi Multimode Gateway Local Control in Home Assistant
Set up the Xiaomi Multimode Gateway (ZNDMWG03LM/ZNDMWG02LM) for true local control in Home Assistant using XiaomiGateway3 — no cloud required.
-
Aqara Wall Outlet H2 EU: Local Setup in Home Assistant
Set up the Aqara Wall Outlet H2 EU (WP-P01D) in Home Assistant via Zigbee2MQTT — no hub, no cloud. Full entity walkthrough and energy automations.
-
Aqara Rotary Knob H1: Zigbee2MQTT + Home Assistant
Set up the Aqara Rotary Knob H1 (ZNXNKG02LM) with Zigbee2MQTT and Home Assistant, no hub needed: pairing, event mode, rotation automations, blueprints.