Aqara Gas Detector JT-BZ-01AQ: Zigbee2MQTT + Home Assistant
Set up the Aqara JT-BZ-01AQ natural gas detector in Home Assistant via Zigbee2MQTT: pairing, all 10 entities, sensitivity, automations.
~/archive $ ls -la
Archive
aqara
-
-
Aqara Air Monitoring Panel S1 (KQJCMB11LM) in Home Assistant via Zigbee2MQTT
Set up the Aqara Air Monitoring Panel S1 locally with Zigbee2MQTT and Home Assistant. All four sensor entities, known PM2.5 bug, ZHA caveats, and calibration tips.
-
Aqara Hub M2 vs M3 for Home Assistant: Which to Buy
M2 and M3 aren't the same integration in Home Assistant. One uses HomeKit Controller, the other needs dual-stack. Here's the decision guide.
-
Aqara Climate Sensor W100: Local Setup With Zigbee2MQTT
The W100 ships in Thread firmware and won't pair to Zigbee2MQTT until you switch it. Full walkthrough: firmware switch, Z2M pairing, thermostat mode, and privacy verdict.
-
Aqara Wireless Switch E1 (WXKG16LM) and H1 (WXKG15LM): Zigbee2MQTT and Home Assistant Guide
Pair the Aqara Wireless Switch E1 with Zigbee2MQTT, build reliable HA automations, and fix the WXKG15LM binding gotcha that hides left from right.
-
Aqara Smart Lock U100: Home Assistant Local Setup Guide
How to integrate the Aqara U100 smart lock with Home Assistant via Matter. Covers hub requirements, entities, cloud dependencies, and the real gotchas.
-
Aqara LED Strip T1 (LGYCDD01LM): Zigbee2MQTT & HA Guide
Set up the Aqara LED Strip T1 (LGYCDD01LM) with Zigbee2MQTT and Home Assistant: entities, segment-control MQTT payloads, known bugs, cloud-free operation.
-
Aqara LED Bulb T2: Zigbee2MQTT Setup for Home Assistant
Pair the Aqara LED Bulb T2 with Zigbee2MQTT and Home Assistant for fully local control. Updated for Z2M 2.7.2 native support, no external converter.
-
Aqara and Xiaomi on an IoT VLAN with Home Assistant
VLAN isolation breaks Aqara hub discovery and Xiaomi Miio control. The fix is mDNS reflection, outbound NAT, and firewall rules in the right order.
-
Aqara WSDCGQ12LM Pressure Reads Null? Z2M Fix + Calibration
Aqara WSDCGQ12LM pressure entity null in Home Assistant via Zigbee2MQTT? Fix the Z2M parse bug, then calibrate absolute pressure to sea-level.