Aqara Wall Switch H1 No Neutral: Zigbee2MQTT + Home Assistant
Set up the Aqara Wall Switch H1 no-neutral (QBKG38LM) with Zigbee2MQTT and Home Assistant — pairing, decoupled mode, automation YAML, LED bulb gotcha.
~/archive $ ls -la
Archive
zigbee2mqtt
-
-
Aqara Vibration Sensor (DJT11LM): Local Setup via Zigbee2MQTT
Pair the Aqara DJT11LM vibration sensor to Zigbee2MQTT — no hub, no cloud. Pairing, sensitivity tuning, and automations for Home Assistant.
-
Aqara Smart Plug EU (SP-EUC01): Local Setup in Home Assistant
Set up the Aqara SP-EUC01 smart plug in Home Assistant via Zigbee2MQTT — no Aqara hub, no cloud. Pairing, energy dashboard, automations, firmware bug fix.
-
Aqara Light Sensor T1 (GZCGQ11LM) in Home Assistant via Zigbee2MQTT
Pair the Aqara GZCGQ11LM light sensor to Home Assistant via Zigbee2MQTT — no hub, no cloud. Pairing, entities, detection period, automations.
-
Aqara Water Leak Sensor in Home Assistant (No Hub)
Pair any Aqara water leak sensor to Home Assistant via Zigbee2MQTT — no Aqara hub, no cloud. Pairing, entities, automations, troubleshooting.
-
Aqara Temperature Sensor T1 in Home Assistant (No Hub)
Pair the Aqara T1 temperature/humidity sensor to Home Assistant via Zigbee2MQTT — no Aqara hub, no cloud. Setup, entities, calibration, fixes.
-
Aqara Wireless Mini Switch (WXKG11LM): Pair with Zigbee2MQTT and Build Home Assistant Automations Without the Aqara Hub
The Aqara Wireless Mini Switch is a CR2032-powered Zigbee button that fits in a shirt pocket and sticks anywhere with double-sided tape. Single press,
-
Aqara FP1E Presence Sensor: Full Local Setup with Zigbee2MQTT and Home Assistant
The Aqara FP1E is a mmWave presence sensor that runs entirely over Zigbee. No Aqara hub required — pair with Zigbee2MQTT for 100% local presence detection in Home Assistant.
-
Aqara SP-EUC01 with Zigbee2MQTT: Full Local Power Monitoring in Home Assistant
The Aqara SP-EUC01 gives Home Assistant local switching and energy readings through Zigbee2MQTT. It uses Zigbee rather than Wi-Fi, so the plug does not need an Aqara account or an IP connection to the vendor. Below are the pairing steps, metering entities, Energy dashboard setup, and two automation examples. The troubleshooting section also covers a…
-
Aqara Water Leak Sensor in Home Assistant via Zigbee2MQTT (No Hub)
Pair the Aqara SJCGQ11LM or SJCGQ12LM to Home Assistant locally via Zigbee2MQTT — no hub, no cloud. Full setup, automations, and placement guide.