Aqara FP300 + Home Assistant: Local Setup via Zigbee2MQTT
Switch the Aqara FP300 from Thread to Zigbee, pair it in Zigbee2MQTT, and run it locally in Home Assistant with the full configuration entity set.
~/archive $ ls -la
Archive
Local Control
-
-
Xiaomi Home Assistant Local Control Outside China
The official ha_xiaomi_home integration has three control modes. Outside China, only one is genuinely local, and it has real gaps. Here's what you get.
-
Does Aqara Work Without Internet? What Actually Stays Local
Aqara's local vs cloud behavior explained: what survives an outage, what dies, whether LAN mode works, and how Home Assistant removes the cloud.
-
Aqara Hub E1 + Home Assistant: Local Integration Guide
Connect the Aqara Hub E1 (ZHWG16LM) to Home Assistant without cloud — HomeKit Controller, XiaomiGateway3, and AqaraGateway paths compared.
-
Aqara RTCGQ13LM: Local Setup via Zigbee2MQTT
Pair the Aqara RTCGQ13LM to Zigbee2MQTT and Home Assistant with no hub or cloud. Covers pairing, detection interval, sensitivity, and known bugs.
-
Aqara Vibration Sensor (DJT11LM): Local Setup via Zigbee2MQTT
Pair the Aqara DJT11LM vibration sensor to Zigbee2MQTT — no hub, no cloud. Pairing, sensitivity tuning, and automations for Home Assistant.
-
Aqara Smart Plug EU (SP-EUC01): Local Setup in Home Assistant
Set up the Aqara SP-EUC01 smart plug in Home Assistant via Zigbee2MQTT — no Aqara hub, no cloud. Pairing, energy dashboard, automations, firmware bug fix.
-
Aqara Door Sensor T1 + Home Assistant: Local Setup Guide
Set up the Aqara Door and Window Sensor T1 (MCCGQ12LM) in Home Assistant without the Aqara cloud. Covers Zigbee2MQTT and ZHA, model variants, battery quirks, and automations.
-
Aqara Hub M2 + Home Assistant: Full Local Control, No Cloud
Set up Aqara Hub M2 with Home Assistant using HomeKit Controller — all local, no cloud hop, no Aqara account needed after initial setup.
-
Aqara FP1E Presence Sensor: Full Local Setup with Zigbee2MQTT and Home Assistant
The Aqara FP1E is a mmWave presence sensor that runs entirely over Zigbee. No Aqara hub required — pair with Zigbee2MQTT for 100% local presence detection in Home Assistant.