Aqara Ceiling Light T1M (CL-L02D): Zigbee2MQTT & Home Assistant Local Setup
Pair the Aqara Ceiling Light T1M (CL-L02D) with Zigbee2MQTT and Home Assistant, including the Thread-mode switch that trips up most first-time pairings.
~/archive $ ls -la
Archive
Thread
-
-
Aqara Shutter Switch H2 EU in Home Assistant: Two Paths to Local Control
Aqara Shutter Switch H2 EU (DS-K02D/E) works with Home Assistant via Zigbee2MQTT or Thread/Matter — both fully local. Here's what each path takes.
-
Aqara Door/Window Sensor P2: Matter/Thread in Home Assistant
How to pair the Aqara P2 door sensor to Home Assistant via Matter over Thread: prerequisites, step-by-step pairing, entity setup, and troubleshooting.
-
Aqara Climate Sensor W100: Local Setup With Zigbee2MQTT
The W100 ships in Thread firmware and won't pair to Zigbee2MQTT until you switch it. Full walkthrough: firmware switch, Z2M pairing, thermostat mode, and privacy verdict.
-
Aqara LED Bulb T2: Zigbee2MQTT Setup for Home Assistant
Pair the Aqara LED Bulb T2 with Zigbee2MQTT and Home Assistant for fully local control. Updated for Z2M 2.7.2 native support, no external converter.
-
Aqara Hub M100 and Home Assistant: Local Matter Setup
Connect Aqara Hub M100 to Home Assistant via Matter bridge for local control. VLAN setup, entity differences from M2/M3, and what still needs cloud.
-
Aqara Hub M3 as a Matter Bridge for Home Assistant: True Local Setup Guide
The Aqara Hub M3 can run supported automations on the hub and expose devices to Home Assistant over Matter or HomeKit. Those are separate connections: a local HA integration does not make every Aqara app feature work offline. This guide covers both HA routes, the M3’s separate Thread border-router role, IR options, and an offline…