Aqara Water Leak Sensor in Home Assistant (No Hub)
Pair any Aqara water leak sensor to Home Assistant via Zigbee2MQTT — no Aqara hub, no cloud. Pairing, entities, automations, troubleshooting.
Aqara
Aqara Temperature Sensor T1 in Home Assistant (No Hub)
Pair the Aqara T1 temperature/humidity sensor to Home Assistant via Zigbee2MQTT — no Aqara hub, no cloud. Setup, entities, calibration, fixes.
Aqara Door Sensor T1 + Home Assistant: Local Setup Guide
Set up the Aqara Door and Window Sensor T1 (MCCGQ12LM) in Home Assistant without the Aqara cloud. Covers Zigbee2MQTT and ZHA, model variants, battery quirks, and automations.
Aqara Hub M2 + Home Assistant: Full Local Control, No Cloud
Set up Aqara Hub M2 with Home Assistant using HomeKit Controller — all local, no cloud hop, no Aqara account needed after initial setup.
Aqara Wireless Mini Switch (WXKG11LM): Pair with Zigbee2MQTT and Build Home Assistant Automations Without the Aqara Hub
The Aqara Wireless Mini Switch is a CR2032-powered Zigbee button that fits in a shirt pocket and sticks anywhere with double-sided tape. Single press,
Aqara Vibration Sensor (DJT11LM): Zigbee2MQTT Setup and Five Local Automations for Home Assistant
The Aqara DJT11LM is a CR2032-powered Zigbee vibration sensor that detects vibration, tilt, and drop events — all 100% local with Zigbee2MQTT and Home Assistant.
Aqara FP1E Presence Sensor: Full Local Setup with Zigbee2MQTT and Home Assistant
The Aqara FP1E is a mmWave presence sensor that runs entirely over Zigbee. No Aqara hub required — pair with Zigbee2MQTT for 100% local presence detection in Home Assistant.
Aqara Roller Shade Driver E1: Complete Home Assistant Local Setup Guide
The Aqara Roller Shade Driver E1 is one of the cheapest smart blind motors that works 100% locally with Home Assistant — no hub, no Aqara account, no cloud. But the calibration process is counterintuitive if you’ve never done it before.
Aqara T1 Temperature & Humidity Sensor (WSDCGQ12LM): Home Assistant Zigbee Setup Guide
The Aqara T1 (WSDCGQ12LM) is a compact Zigbee sensor that reports temperature, humidity, and atmospheric pressure — entirely locally, no cloud, no Aqara account required after initial pairing. Battery-powered, it runs for up to two years on a single CR2032 cell. This guide covers both Zigbee2MQTT and ZHA integration paths, what entities to expect, how … Read more
Aqara SP-EUC01 with Zigbee2MQTT: Full Local Power Monitoring in Home Assistant
Most smart plugs are a surveillance compromise waiting to happen. You buy them for energy monitoring, and they phone home to a cloud server you don’t control every time you flip a switch or pull a power reading. The Aqara SP-EUC01 is different — not because Aqara is particularly virtuous, but because it’s Zigbee. No … Read more