Aqara Climate Sensor W100: Local Setup With Zigbee2MQTT
The W100 ships in Thread firmware and won't pair to Zigbee2MQTT until you switch it. Full walkthrough: firmware switch, Z2M pairing, thermostat mode, and privacy verdict.
~/archive $ ls -la
Archive
Integration
-
-
Aqara Wireless Switch E1 (WXKG15LM/WXKG16LM): Z2M + HA Guide
Pair the Aqara Wireless Switch E1 with Zigbee2MQTT, build reliable HA automations, and fix the WXKG15LM binding gotcha that hides left from right.
-
Aqara Smart Lock U100: Home Assistant Local Setup Guide
How to integrate the Aqara U100 smart lock with Home Assistant via Matter. Covers hub requirements, entities, cloud dependencies, and the real gotchas.
-
Aqara LED Strip T1 (LGYCDD01LM): Zigbee2MQTT & HA Guide
Set up the Aqara LED Strip T1 (LGYCDD01LM) with Zigbee2MQTT and Home Assistant: entities, segment-control MQTT payloads, known bugs, cloud-free operation.
-
Aqara LED Bulb T2: Zigbee2MQTT Setup for Home Assistant
Pair the Aqara LED Bulb T2 with Zigbee2MQTT and Home Assistant for fully local control. Updated for Z2M 2.7.2 native support, no external converter.
-
Aqara and Xiaomi on an IoT VLAN with Home Assistant
VLAN isolation breaks Aqara hub discovery and Xiaomi Miio control. The fix is mDNS reflection, outbound NAT, and firewall rules in the right order.
-
Aqara Hub M2 in Home Assistant: HomeKit Controller Setup
How to add the Aqara Hub M2 (ZHWG12LM) to Home Assistant via HomeKit Controller, what cloud dependency remains after setup, and when Matter is worth considering instead.
-
Aqara Hub M100 and Home Assistant: Local Matter Setup
Connect Aqara Hub M100 to Home Assistant via Matter bridge for local control. VLAN setup, entity differences from M2/M3, and what still needs cloud.
-
Aqara HomeKit Mode: Local Automations vs Cloud Explained
Aqara HomeKit mode is not the same as local automations. What runs offline, what still needs cloud, and which setup fits your privacy goals.
-
Aqara FP300 + Home Assistant: Local Setup via Zigbee2MQTT
Switch the Aqara FP300 from Thread to Zigbee, pair it in Zigbee2MQTT, and run it locally in Home Assistant with the full configuration entity set.