Aqara FP2 Presence Sensor: Local Setup in Home Assistant
Set up the Aqara FP2 in Home Assistant with no cloud. Covers zones, HomeKit Controller pairing, and blocking Aqara traffic on a VLAN.
~/archive $ ls -la
Archive
vlan
-
-
Aqara G2H Pro: Local Camera Stream in Home Assistant (No Cloud, go2rtc + Frigate)
The Aqara Camera Hub G2H Pro combines a 1080p indoor camera with an Aqara Zigbee hub. You can bring its HomeKit video into a local go2rtc and Frigate setup, but the RTSP address in that arrangement belongs to go2rtc, not the camera. This guide follows the practical route: provision the camera’s Wi-Fi, pair it to…
-
Aqara E1 Hub with Home Assistant: Complete Local Setup (No Cloud Required)
The Aqara Hub E1 bridges supported Aqara Zigbee devices to Home Assistant over HomeKit. The hub manages the Zigbee network; HA receives the accessories exposed by its firmware. That gives local control without turning the E1 into a ZHA or Z2M coordinator. If the E1 is already in Apple Home, remove that HomeKit binding without…