Zigbee2MQTT Unavailable After HA Restart: bridge/state
Every Zigbee2MQTT entity goes unavailable after a Home Assistant restart while Zigbee2MQTT itself looks fine. One MQTT topic explains it. All fixes stay local.
~/archive $ ls -la
Archive
troubleshooting
-
-
Zigbee2MQTT Retain vs state.json: What Survives a Restart
Which restart you had decides the fix: Zigbee2MQTT republishes state on its own in two of three cases, and retain only covers the third. All local.
-
Zigbee2MQTT MQTT Topics Explained: set, get, Availability
A practitioner's map of Zigbee2MQTT's MQTT topic model: state, /set, /get, availability, bridge topics, and the three output modes, all local, no cloud.
-
Zigbee2MQTT OTA Update Failed or Stuck? How to Fix It
A Zigbee2MQTT OTA that errors out or freezes at a percentage is rarely a bricked device. Here's what each failure means and which fix actually applies.
-
Zigbee2MQTT Rename Device: What Breaks in Home Assistant
Renaming a Zigbee2MQTT device changes its MQTT topic instantly but not its Home Assistant entity IDs. What breaks, what doesn't, and how to rename safely.
-
Zigbee2MQTT database.db Corrupted or Wiped: What to Do
Zigbee2MQTT lost every device after a restart, or database.db is 0 bytes? What the file stores, why it happens, and how to recover before re-pairing.
-
Tuya TS011F Power Monitoring Not Working: How to Fix
Power, current and voltage missing on a Tuya TS011F Zigbee plug? Firmware 1.0.5 disabled automatic reporting. Here's the polling fix, fully local.
-
Aqara/Xiaomi Smart Plug Power Monitoring Not Working
Aqara or Xiaomi plug showing 0W or N/A in Zigbee2MQTT or ZHA? Two documented reporting faults, the firmware trap to avoid, and how to tell them apart.
-
Zigbee2MQTT Debounce vs Throttle: Fixing Duplicate Updates
Zigbee2MQTT has five per-device options for noisy state updates. What debounce, throttle, and the filter options each do, and which one fits your device.
-
Zigbee2MQTT \”Failed to Interview\”: Why Pairing Gets Stuck
A Zigbee2MQTT pairing that stalls on \"failed to interview\" usually means the join worked and the discovery queries timed out — not a config mistake.