N. Lee 
The Aqara Wireless Mini Switch is a CR2032-powered Zigbee button that fits in a shirt pocket and sticks anywhere with double-sided tape. Single press,
The Aqara DJT11LM is a CR2032-powered Zigbee vibration sensor that detects vibration, tilt, and drop events — all 100% local with Zigbee2MQTT and Home Assistant.
The Aqara FP1E is a mmWave presence sensor that runs entirely over Zigbee. No Aqara hub required — pair with Zigbee2MQTT for 100% local presence detection in Home Assistant.
The Aqara Roller Shade Driver E1 is one of the cheapest smart blind motors that works 100% locally with Home Assistant — no hub, no Aqara account, no cloud. But the calibration process is counterintuitive if you’ve never done it before.
The Aqara T1 (WSDCGQ12LM) is a compact Zigbee sensor that reports temperature, humidity, and atmospheric pressure — entirely locally, no cloud, no Aqara account required after initial pairing. Battery-powered, it runs for up to two years on a single CR2032 cell. This guide covers both Zigbee2MQTT and ZHA integration paths, what entities to expect, how … Read more
Most smart plugs are a surveillance compromise waiting to happen. You buy them for energy monitoring, and they phone home to a cloud server you don’t control every time you flip a switch or pull a power reading. The Aqara SP-EUC01 is different — not because Aqara is particularly virtuous, but because it’s Zigbee. No … Read more
The Aqara G2H Pro is one of the few affordable indoor cameras that doubles as a Zigbee hub — and with the right setup, you can get a fully local camera stream into Home Assistant without routing a single frame through Aqara’s cloud. The trick is that the G2H Pro doesn’t speak raw RTSP by … Read more
Pair the Aqara SJCGQ11LM or SJCGQ12LM to Home Assistant locally via Zigbee2MQTT — no hub, no cloud. Full setup, automations, and placement guide.
Aqara Cube T1 Pro: Home Assistant Automations via Zigbee2MQTT The Aqara Cube T1 Pro is one of the most action-dense physical controllers you can put on a coffee table. One device, one hand, and you get 58+ distinct gestures — shake, flip, rotate, tap, hold — each mappable to a different Home Assistant action. That’s … Read more
Aqara Door Sensor in Home Assistant via Zigbee2MQTT (No Hub) Aqara door and window sensors are some of the best bang-for-buck contact sensors in the Zigbee ecosystem — small, reliable, and cheap enough to put on every door and window without breaking anything. But Aqara pushes you toward their hub or the Mi Home cloud. … Read more
